How To Get Wired Internet In Multiple Rooms?

Do you want your internet connection to reach every room of your house? Maybe you want to connect all the computers and devices for seamless, fast access to the web? Whatever the reason may be, getting wired internet in multiple rooms is easier than you might think.

Wired home networks have a multitude of perks over wireless ones. It’s a lot quicker, far more dependable, and is superior when working with remote equipment. Even with this challenge, the biggest impediment to wired networking is how to run network wires to other rooms.

For this article, I’ll examine some aspects of home networking and some ways to install wired internet in your household so you can have a wired connection in multiple rooms.

Getting Wired Internet in Multiple Rooms

It would be best if you thought about how your house will be wired before you get started. You will need to connect your devices to a few critical pieces of hardware.

Equipment 

First, get to know the equipment required to connect multiple rooms to the internet via wired connection –

Routers

As for home networking, a router serves as the principal point of connection between devices. The ones with ports for wired network connection are best for you if you have a home network (among other things). You may be able to find multiple Ethernet ports on the rear of your router. Unless you want to connect numerous devices over Ethernet, your existing router should suffice for you.

Switches

When you visualize all of the gadgets you wish to connect to your network with wires, you may discover that your router has insufficient ports. Additionally, there is another networking device called a switch that is needed.

The general purpose is to send data from several input ports to a singular output port. As you can see, it is possible to add ports to a router by using switches.

Hubs

Hubs are gadgets that are commonly misidentified as switches, but they’re fundamentally different. While controls employ a virtual circuit paradigm, hubs use a broadcast model. When hubs connect all devices to the network, switches merely connect the sender and receiver.

Connecting Multiple Rooms via Wired Internet

Two ways to obtain a wired connection to multiple rooms in your house are available. The most straightforward, also the first technique we’ll discuss is quite simple, which is –

Running Ethernet Wires

Running Ethernet connections from your router to your computers is the easiest way to become connected to the internet and to do that –

1. Collect Ethernet cables.
2. Plug one end of the Ethernet cable to your router’s rear panel (in the Ethernet ports).
   
3. Attach the other end to your computer’s Ethernet port.

There should be multiple Ethernet ports on your router. You can run two or three Ethernet cables through numerous rooms and connect the devices with it.

Additionally, the approach described below for using a powerline adaptor may be more suitable for you –

Using Powerline Adapters

You can use powerline adapters to acquire broadband internet connectivity in multiple rooms of your home. These units attach to your wall sockets and take advantage of your home’s electrical wires to send data. To install the powerline adapters –

1. Connect the powerline adapter to your router through an Ethernet connection.
2. Plug the adapter into an outlet closer to your router.
   
3. Go to your other rooms, then connect your device to the powerline adapter using an Ethernet cable. Plug the adapter into an outlet. Finally, you are ready to go.

If you wish to add more devices to the network, obtain extra adapters and connect them. All of them will transfer information to the adapter that’s linked to your router. It would be best to plug them into an outlet rather than a power strip to avoid issues.

Summary: Get Wired Internet in Multiple Rooms

• Set up a second wireless router.
• Place both routers in the same room.
• Connect them via Ethernet cable.
• Switch off one of the routers.
• Connect your computer to both routers.