How To Connect AirPods To Windows 10?

The wireless headphones apple airpods are very popular with young people, they can connect their Apple devices with the IOS system and without a wire to the audio device. But how to connect them to windows 10 can be confusing. There is no doubt that apple products are more popular among the youth, but when it comes to being connected to windows 10 PC, most users do not know how to do it. Here we will discuss how to connect airpods with windows 10 in this article.

Air pods are wireless earbuds made by Apple. They connect to devices that play music, such as phones and tablets via Bluetooth. Besides playing audio, Air pods also have a high-end microphone that automatically filters out noise in the background. While Air Pods are commonly used to connect to phones and tablets, you may also connect them to a pc. Here’s how to connect Air Pods to Windows 10.

Apple Air pods connect to other Apple products via their H1 or W1 chips. However, this is only available to other Apple products. While Apple products seem to sound more high-tech than other products, Apple Air pods can still use Bluetooth technology. Albeit there are further advancements in technology hooked to it, such as wider range and easier connectivity, once a device has Bluetooth, you can still connect it to your Air pods.

Pairing your Air Pods to Windows 10

1. First, open the Settings app on windows 10. You will be able to find it by typing “settings” on the search bar in the taskbar and open the Settings app. Another way to open the settings app is by holding the windows key and then pressing “I” on the keyboard.
2. In the Settings windows, navigate your way and look for Devices. Click it to proceed to the next window.
3. When the Devices window appears, you will see multiple sections. Locate the Bluetooth and other devices section. It is commonly at the very top.
4. On the upper right corner of the section, click on the toggle switch to turn the Bluetooth on.
5. Once the Bluetooth is turned on, click the selection “Add a Bluetooth or other Device.”
6. Another window will appear with multiple selections asking you what device you would like to connect to. Choose the first selection labeled “Bluetooth.”
7. When the next window appears, locate and select your Air pods. If you cannot see your Air pods in the list of devices to connect to, make sure that you have turned your Air pods on so that windows can connect to it.
8. Turn your Air pods on by holding the circular button found at the back of your Air Pods for about 5 seconds or more. When the charging light on your Air pods starts blinking white, lift your finger and check to see if your Air pods appear on the screen.
9. Depending on several factors, it may take longer or shorter before Windows can detect your Airpods, so be patient and wait until it appears.
10. When it appears, select it and wait for a few seconds. You will get a notification stating that you have successfully connected your Air pods.
11. Once your Air pods have successfully connected, play some music and test to see if it works.

Reconnecting your Air pods to Windows 10

When you have already connected your Air pods previously to your desktop, you no longer need to go to the entire process of pairing again. Your computer and your desktop remember the Bluetooth devices that have previously paired with it, so reconnecting is easier and quicker

Your Air pods should now automatically connect to Windows whenever you put them on since they are already paired. However, if it doesn’t, then you can always connect them manually. Just go to settings again and open devices. Scroll down to the audio section and select your Air pods.

You can also choose to disconnect your Air pods by the same method but by choosing “Disconnect” instead.

Listening to music has never been more convenient with these wireless Bluetooth devices. Although there are many available Bluetooth in pods or earphones available, for those using Air pods, you can still connect it to your desktop by following the steps above.

With Apple’s Air pods, you can now listen to quality audio from your pc by connecting your Airpods via Bluetooth to Windows 10.

Summary: Connect AirPods to Windows 10

• Before you begin, make sure that Windows 10 has all the latest updates.
• Make sure to use the latest version of iTunes.
• Make sure the AirPods are charged.
• Make sure your iPhone or iPad is paired with the AirPods.
• Open the Settings app on Windows 10, select "Devices" then click on Bluetooth & other devices.
• If you see your AirPods in the list of connected devices, click on them and click Remove device.
• Click Add Bluetooth or other device then click Bluetooth.
• Put your AirPods in pairing mode. Note that if you have a first-generation set of AirPods, you need to use the charging case to put them into pairing mode by opening up the lid of the case and holding down the setup button for approximately 15 seconds. If you have second-generation AirPods, this step is done automatically once you place them back in their charging case after removing them from your ear. The status light should start flashing white between 1 – 3 seconds later to indicate they are in pairing mode.
• Wait a few moments while Windows searches for nearby devices, then select your Air