How To Install PSI Express Wireless Card?

Are you looking for the best PSI Express Wireless Card? If you still have not found out which one is the best option for you, this post will surely get some helpful information for you.

There is no denying that wireless connectivity is vital for this time and age. However, not all motherboards come with a pre-installed wireless networking card. In this case, you will be required to install a wireless networking card into the PCI express slot located on the motherboard.

Doing this is easy and doesn’t require a lot of effort. In this article, we will take you through a step-by-step guide to installing PSI express wireless card to your PC.

Step 1: Unplug Your Computer

Before proceeding with the installation, you first need to turn off your computer and unplug it. Otherwise, you are likely to damage certain components of your computer when you try to install the cards with active power. It is also advisable to wait for your computer to cool down first if you were recently using it.

Step 2: Open the Case

Since you will be installing the PCI cards on the motherboard, you will need to open its case. Removing the case can be different for each computer. For this reason, it is a good idea to consult with your manufacturer for instructions if you are stuck in this step.

Step 3: Locate the PSI Slots

After successfully removing the case, you now need to identify the PSI slot. Usually, these are rectangular slots that align to the bays behind the case.

Step 4: Get Rid of Metal Plate

If your computer includes removable plates, you need to first remove them before inserting the wireless card. The metal plate is usually located on the back of the case and aligns to the PSI slot. Use a screwdriver to unscrew it and then remove it. Consult your manual on how to remove these plates.

Step 5: Insert the Wireless Networking Card

Once you find the slot, slide the adapter and ensure that the pins touch the slot’s contacts. Install by holding the card on its faceplate and push the card straight into the slot until it is firmly in place. The faceplate should be up against the hole on your PC’s back.

Step 6: Secure the Wireless Card to the Case

The next step is to secure the wireless networking card to the case using the screws that you removed earlier. Preferably, you should tighten two screws on either side of the metal bracket to prevent the card from wiggling around.

Step 7: Attach and Position Antennas

After the card is fastened to your computer’s case, you need to attach the external antennas that came with the card. To do this, you should first remove the yellow caps protecting the holes on the back of the wireless card.

Using your hands, twist the antennas to the adapter antenna’s port. The antenna should be positioned straight so that they face upwards and at a 90 degrees angle from the adapter. This will ensure that your wireless adapter achieves optimal performance and range. However, you can keep adjusting the antenna’s position if the signal from your wireless card is weak.

Step 8: Power On Your Computer

Once done with the installation, close the computer case and power on your computer. If you are using Windows 10, your PSI express wireless card should install the necessary drivers for its components automatically after rebooting.

However, if you are not using Windows 10, you will need to download the drivers on a wired Ethernet connection before connecting your PC with your card. Alternatively, if your wireless card came with a CD, you can set it up into the CD-ROM drive. This is very handy if your PSI express wireless card does not work out of the box.

Summary: Install PSI Express Wireless Card

• Turn on the computer. Click the Start button, select Settings and then Control Panel.
• Double-click Network and Internet Connections.
• Double-click Network Connections.
• Right-click the Wireless Connection icon in the system tray and then click View Available Wireless Networks.
• Select your access point name from the list of available networks, and then click Connect.
• In Connect to network dialog box, select Infrastructure network type and click OK.
• Access point prompts you to enter a network key (also called a pass phrase or password). If you are prompted for a type of encryption, WPA is recommended. Click OK to save the setting changes.
• Close all windows and restart computer.

Conclusion

That is all there is to installing PSI express wireless card. We hope that you find this guide useful to help you get a WiFi connection in no time.