Administrator Updated on October 13, 2022 The joy of owning an iPhone 6 is that it cannot be easily hacked and customized. However, if you are a fan of customizing your device, you should try arranging iOS using a custom firmware. Flashing an iPhone 6 with a custom firmware is a bit tricky because it requires unlocking the bootloader and then loading the new firmware on the phone. If you want to know how to flash an iPhone 6, read this article in which we will go through all the steps necessary for this process.
Apple’s iPhone Operating System features an attractive UI and reacts very quickly. This system is developed especially for Apple iPad and iPhone. For that, they feature excellent hardware integration and enhanced application.
However, there are some issues reported by many iPhone users, which require flashing the device. So, here, we will give you a decent idea about how to flash an iPhone. There are several methods to do this. You may select the one according to your preference.
Flashing an iPhone using iTunes
- First, you have to find the iPhone 6 Flash File and download it. You may get it from here – Download iPhone 6 Firmware.
- Then, download the iTunes application on your PC and set it up. After setting it up, access the application.
- Join the iPhone with your PC. For that, Select and hold the home button and keep the data cable in your iPhone.
- Permit the access request of iTunes to the iPhone. Choose “Trust.” It will permit iTunes to read and operate the data of the iPhone.
- Then, the restore options will appear. For Mac operating system, go for the “Option” button and pick “Restore.” If it is a Windows PC, keep pressing the “Shift” button and select “Restore.” You may also go for the “Update” option instead of “Restore.”
- Selecting the “Update” option will save the data of your iPhone’s internal memory. Choosing “Restore iPhone” will remove every content and information of the device.
- If you have the required firmware on the device, it will ask you to choose the firmware. Pick the firmware update you downloader earlier and hit “OK.” It will initiate the restoration.
- The restoring process will be completed in a short time. This process doesn’t need an active network. Also, keep in mind that during the whole process, never disconnect your iPhone from the PC. Disconnecting the device will put it into dead mode.
Flashing an iPhone using iMyFone Fixppo
- iMyFone Fixppo is the best third-party application to flash and restore an iPhone without losing any of your iPhone’s data and information. First, you need to download the application. Then, set it up on the computer. You may download it from here – Download iMyFone Fixppo.
- Access the application and select “Standard Mode” from the home page.
- Then, join the iPhone to the PC and select “Next.” If required, first unlock the device and then proceed.
- Usually, the Fixppo application will automatically identify your iPhone. However, if it doesn’t, you have to activate the “Recovery Mode” of the device. For that, press on the “Power” button and the “Home” button of your iPhone together and hold them.
- The Apple logo will appear, but don’t release the buttons yet. Release the buttons when the “Connect to iTunes” icon appears. Now, the device is in Recovery mode.
- Fixppo will undoubtedly identify the iPhone when it is in Recovery mode. After recognizing the iPhone, the application will open a screen with every usable firmware update. Go for the one that is applicable for your device and choose “Download.”
- After completing the download, the firmware will be verified, and the application will be extracted. Then, select the “Start” option to initiate the restoring process, and in a short time, Fixppo will flash the iPhone. Select “Done” after completing the whole process.
Summary: Flash an iPhone 6
- Download iTunes.
- Connect your iPhone 6 to your computer.
- Restore your iPhone 6.
- Hold down the Power button and the Volume Down button simultaneously until you see “Recovery Mode”.
- You will see a new popup message asking you if you want to update or restore. Select Update.
- Wait for the process to complete.
