How To Unbend IPhone 6?

Your iPhone 6 is bent. Let's face it — that sucks. The good news is, there are a few things you can do to try and unbend your device. When Apple designed the thinner, harder-to-hold iPhone 6 they probably didn't expect us to shove it in our jean pockets and backpacks, but we did anyway. Now we're paying the silly price of accidentally damaging our best smartphone. But thanks to the Internet, you have some options if you do bend your phone by accident.

The bending problem is one of the most common complaints of iPhone 6 users. With a metal-made body, this device is pretty likely to bend easily. However, the bent body of the iPhone 6 does not affect its other features, but it ruins the phone's outer look badly.

Do you also have a bent iPhone 6? If you are looking for a quick fix for this problem, you are in the right place. In this context, we will suggest to you some effortless ways to unbend your iPhone 6.

Here you go.

Method 1: Unbend iPhone 6 with C-Clamp

C-Clamp is a great tool to unbend your iPhone 6 with zero risks. This small tool works amazingly to fix this problem super-fast. You will find it at any tool shop nearby you. Besides, you are going to need some woodblocks too. You can make it your own or get them from any art shop. Here is the unbending process for you.

1. Take your iPhone 6 and remove the digitizer very carefully.
2. Place two woodblocks on a wooden table. Avoid doing it on a glass table to avoid casualties.
3. Place your iPhone 6 on the woodblocks. The blocks should be placed under the two edges of your iPhone 6.
4. Put another woodblock on the top of your iPhone.
5. Set the C-Clamp tool on the top woodblock. You must set it on the bent area of your iPhone 6.
6. Slowly rotate and push the screw down. Please do not apply a lot of pressure at once. Do it with patience. Your iPhone 6 will get unbent.

Method 2: Unbending iPhone 6 with Hairdryer

If you don't want to use any tool and fix it with the most accessible ways ever, this process is for you. As iPhone 6 has a metal body, you can make it soften with heat. And for that, you need a hairdryer here. Check out the entire procedure added below.

1. Take your iPhone 6 and switch it off.
2. Turn on your Hairdryer and set your iPhone under the hot air. The hot air will soften the metal body of your iPhone 6.
3. Take a handkerchief and lay it on a table.
4. Place and hold your iPhone 6 on the table.
5. Apply pressure over the edge of the desk. Do it until the bent iPhone device has a plain surface.

Method 3: Fix Bent iPhone 6 with gTool

gTool is a very effective tool to unbend the iPhone 6 with zero trouble. Also, it has no risk of hampering the display or other parts of your iPhone 6. You can find this tool in any online or offline tool shop. Here is how it works.

1. Take your iPhone 6 and remove the digitizer very carefully.
2. Place the bend line of your iPhone on the pillar bed of gTool.
3. Rotate the first screw knob on the right and tighten it to hold the iPhone firmly.
4. Fix the position of the Pillar bed and tighten the second screw knob anticlockwise.
5. Rotate the knobs clockwise to loosen and remove the device from gTool.

Summary: How to unbend iPhone 6?

• If you've bent your iPhone and want to fix it yourself, first use a bit of force on the paperclip and lever against the bottom left corner of the current rear facing housing.
• My advice is to buy a replacement rear housing and attempt to replace that in conjunction with the following guide.
• Insert a sim removal tool or paperclip into the small hole on the right side of the iPhone 6.
• To get around this problem, open your phone up (you have to take out your screen) then remove screen layer 3 by peeling off carefully with a heat gun, scissors or even just your nails.
• You can use this guide to disassemble your phone and apply heat to the bent area.
• If you bend your iPhone 6 it will be expensive and time consuming but not impossible to fix it yourself.