How To Fix Media Disconnected Error In Windows 10?

Media disconnected error in Windows 10 is a common error that shows up when you're trying to play music, movies, or video clips on your computer. The Media Disconnected issue occurs with MP3 files and WMA files. It's commonly believed that it is simply a problem with the file format. But there's more to it than that. There are a few different reasons why the Media Disconnected error may occur. Often it can be fixed, we'll guide you through how to solve media disconnected error in Windows 10 so your media works as expected!

There is no doubt that almost all computers can become super useful if there is an internet connection. You can play games, make documentation, run software offline but the majority of the needs of a user, especially information, are now dependent online. However, there might be a time when you don’t have access to the internet and Windows prompts you that the media is disconnected.

There are several ways of determining why you don’t have internet connection but for a specific problem like ‘media disconnected error’, the problem can lie on either the system’s software or hardware. Here are some of the common methods to fix the problem.

How To Fix Media Disconnected Error?

Method 1: Resetting WINSOCK And IP Stack

1. On the Windows search bar, type ‘command prompt’. From the given results, right-click on the exact result and choose ‘Run as administrator’.
2. You can type either of the following or all of them and press the key ‘Enter’ afterwards:
   a).  netsh command winsock reset catalog = reset Winsock entries.
   b).  netsh int ipv4 reset reset.log = reset IPv4 TCP/IP stack.
   c).  netsh int ipv6 reset reset.log = reset the IPv6 TCP/IP stack.
3. Restart Windows after the commands are executed.

Method 2: Running Network Troubleshooter

1. Click on ‘Start’ and open the page ‘Settings’.
2. Proceed to ‘Updates and security’ and go to the tab ‘Troubleshoot’.
3. Choose ‘Network Adapter’ from the list to troubleshoot and enable it.
   
4. Restart Windows afterwards.

Method 3: Power-Cycle The System, Modem And Router

1. Shut down the system and switch OFF the modem and/or router.
2. After a few minutes, switch ON the modem and/or router until the light indicators are stable.
3. Try to check the internet connection through a device besides the PC. If there is a connection, proceed to power up the system. If not, repeat the steps again or try another method.

Method 4: Resetting TCP/IP

1. On the Windows search bar, type ‘command prompt’. From the given results, right-click on the exact result and choose ‘Run as administrator’.
2. Type the command netsh int ip reset resettcpip.txt and press the key ‘Enter’ to run it.
   
3. Restart Windows after the command is executed.

Method 5: Updating The Network Drivers

1. Access ‘Device Manager’ easily by typing ‘device manager’ on the search bar and select the exact result.
2. Expand the section ‘Network adapters’ and select a network driver by right-clicking it. Then, choose the option ‘Update driver’.
3. Select ‘Browse my computer for driver software’ and follow the given instructions.

Method 6: Resetting Network

1. Click on ‘Start’ and open the page ‘Settings’.
2. Proceed to ‘Network and Internet’.
3. Select ‘Status’.
4. Choose ‘Network reset’ and then, follow the given procedures.
   
5. Restart Windows afterwards.

Method 7: Disabling Sharing Of Network

1. On the search bar, type in ‘ncpa.cpl’ and click ‘Network Connections’ from the result.
2. Select your network by right-clicking it and then, choose ‘Properties’.
3. On the tab ‘Sharing’, ensure that the option ‘Allow other network users to connect through this computer’s internet connection’ is unchecked.
4. Click on ‘OK’.

Method 8: Checking The Network Adapter

1. On the search bar, type in ‘ncpa.cpl’ and click ‘Network Connections’ from the result.
2. Right-click on the questionable network and select ‘Enable’.
3. Alternatively, you can access the ‘Settings’ app, and then, go to ‘Network and Internet’.
4. Select ‘Ethernet’ and choose ‘Change adapter options’ to open ‘Network Connections’. Afterwards, right-click on the questionable network and select ‘Enable’.

Summary: Fix media disconnected error in Windows 10

• Change Your DNS Server.
• Forget the Network and Reconnect.
• Check the Status of Your Network Adapter.

Conclusion

Any of the aforementioned methods can be applied to fix the problem. When one doesn’t have a result, proceed to try the other methods. If the problem is reoccurring, then maybe there is something wrong with your LAN card. You can have it fixed to solve the problem.